Shooting Targets

3/25/2012 5:58:33 AM http://gun-deals.com/deals/5718 Cheapest JHP I could find – $0.243 per round. Any JHP will be ok for SHTF. I set back a bunch of top-quality JHP that’s actually listed in the Best Choices for Self Defense Ammo FAQ But I’m nerdy like that… JediChric

1/10/2012 2:51:20 PM Originally Posted By housewolf: Originally Posted By ColtRifle: Originally Posted By Sixgunn: They suck. Brand new terlet install and I decided to try the new gizmo. Had a funky odor after a couple days since the flange didn’t seal and started seeing fluid seeping around the toilet bottom. I didn’t caulk the edge in an attempt to see if it would leak or not. Never caulk the edge. You want to know immdiately when it starts leaking. Good idea but it looks better when you do, not to mention it’s often required by code. We generally leave a small gap or “weep hole” in the back – out of sight. If I had to caulk, that’s exactly what I’d do. Better it run out onto the floor than seep slowly into the subfloor. BatchelorGroda

4/1/2012 7:48:15 AM NY_Shooter: Fragalistic: NY_Shooter: Fragalistic: What about threads’ seeking advice about where to acquire a part? That’s what the OP is doing in this thread, and I see threads like that all the time. It’s a WTB ad more than a “Where can I buy X online?” thread. Unless of course, the OP put his phone # in the post for people to call him and give him the web address of where to find what he’s looking for. Thanks for the edification. I find your response to be contrary to what I’d have thought. If he’d have put his phone number in the post, it’d have DEFINITELY been a WTB post. As it was, he clearly was asking where to buy…in plain English. It’s OK. You’re kinda new, so maybe you didn’t know. As ttushooter said, when mods see ads in the tech sections, they shut it down and direct the person to the EE. I’m not sure what you’re getting at. He did put his phone # in the post, and it’s clearly worded as a WTB ad. DiIs a Nickle Boron Coated Glock Accessories slide really worth the added expense of doing for a Glock Accessories? Thinking of having a G19 slide coated with it. CovertChannels

3/28/2011 8:49:11 PM I have several of the JHW rifle slings (John weller). They have been awsome. I also have Turner, Brownells and several old MRT rifle slings. The MRT are way under all. The Turner would be better than Brownells but not in the same class as Weller. I have no experience with Ron or Les Tam. I have tested Les Tam’s from someone else and it was great. I would not trade away my Weller’s though. PoppinZombies

AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …
AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …Find a wide variety of AR-15 rifles, rifle accessories and AR-15 parts at Cabela’s. … MWG 90 Rounder AR-15 Magazine M14 Scope Mounts M14 Scope Mounts M14 Scope Mounts – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and [...]

AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …
Find a wide variety of AR-15 rifles, rifle accessories and AR-15 parts at Cabela’s. … MWG 90 Rounder AR-15 Magazine

M14 Scope Mounts
M14 Scope Mounts M14 Scope Mounts – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying [...]

M14 Scope Mounts
M14 Scope Mounts – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from [...]

M14 Scope Mounts –
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

M14 Scope Mounts
M14 Scope Mounts

M14 Scope Mounts

A1 style sights but know I need to
A1 style sights but know I need to use the “L” marked sight for 25M. Now my question with is should I use an “A1 zeroing target” or a “M4 zeroing target” or just make do with an A2 target, now I know these targets make the rifles accurate to 300M+ but I plan on [...]

A1 style sights but know I need to use the “L” marked sight for 25M. Now my question with is should I use an “A1 zeroing target” or a “M4 zeroing target” or just make do with an A2 target, now I know these targets make the rifles accurate to 300M+ but I plan on [...]

A1 style sights but know I need to use the “L” marked sight for 25M. Now my question with is should I use an “A1 zeroing target” or a “M4 zeroing target” or just make do with an A2 target, now I know these targets make the rifles accurate to 300M+ but I plan on shooting up to 25-75 yards at the most since I will be hunting with it this fall in the woods and don’t need a .308 with a scope that can see what color underwear a flea is wearing at 300 yards. So any help will be appreciated.

DVCER
Bronze Contributor
Team Member

Joined: Jan 2001
USA CO, USA
SHTF ammo dog
Offline
Posts: 1632
Link To This Post
Blog User Blog
Media Media Collections 100% (9): 10/5/2011 10:38:41
Irons or optics?

The problem with socialism is, sooner or later, you run out of other peoples money
zulthor
Member
Member

Joined: Jan 2011
USA PA, USA
Online
Posts: 757
Link To 100% (1): 10/6/2011 10:35:52 AM EDT
whether it’s iron sights or optics I bet you could do better if you had a more preciseshooting targetsto aim at.
pilckem
Member
Member

Joined: Jun 2007
USA AL, USA
Offline
Posts: 29
Link To

The new XPS is where its at and if you shop around theres a few companys that will price match Botach when they put the XPS3.0 on sale, which is 426 bucks. So for 26 bucks more than the Aimpoint Pro you can have the XPS with NV compatibility. User Info IM User Email User [...]

The new XPS is where its at and if you shop around theres a few companys that will price match Botach when they put the XPS3.0 on sale, which is 426 bucks. So for 26 bucks more than the Aimpoint Pro you can have the XPS with NV compatibility. User Info IM User Email User [...]

Sniper CountryThis web site and all related or referenced materials and links are solely and strictly for informational purposes.Moreover, this web site is intended solely for the … Remington Trigger Adjustments – Sniper CountryIn the U.S.A., we live in a litigious society, and for those of you who live in Rio Linda, that means fools [...]

bsa scopes – A prototype Urbino Tactical Stock for the Benelli AccessoriesM4 has been undergoing rigorous testing with a major west coast police department during the winter of 2009-2010, and has been receiving rave reviews from test participants. “Apparently,” says Barrie, “it’s just what the doctor ordered. We are very excited to be bringing this [...]

bsa scopes –

A prototype Urbino Tactical Stock for the Benelli AccessoriesM4 has been undergoing rigorous testing with a major west coast police department during the winter of 2009-2010, and has been receiving rave reviews from test participants. “Apparently,” says Barrie, “it’s just what the doctor ordered. We are very excited to be bringing this innovative design to market.”

(West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for the District of Massachusetts, Civil Action No. 1:09-cv-10034(DPW), was settled and dismissed with prejudice. LaRue Tactical has taken a fully paid up, royalty free license under U.S. Trademark Registration Nos. [...]

Report A Non-Emergency Crime OnlineA new form allows Duke community members to report incidents to Duke Police online Police Host Meet And Greet Events“Tips ‘n Treats” sessions begin Oct. 17 (West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for [...]

Already recognized as the brightest sight in today’s military market, the EOTech Sights further eliminates any concern of reticle washout in desert or arctic conditions. ” Now thats good information! Thank you! I looked back at the one I ordered and it does not specify which revision it is. The company does have a great [...]

AK 47 Scope Mount – aimpoint 3x

AK 47 Scope Mount –
aimpoint 3x

Aimpoint M2 – I think it’s what I’m trying to find for my 522, but SIG customer service is clueless. Thanks! Sure can. Here you go. They have to mill out a slot in the lower for this one. Here is the one that that my 522 came with. it has a screw that goes [...]

Aimpoint M2 –

I think it’s what I’m trying to find for my 522, but SIG customer service is clueless. Thanks! Sure can. Here you go. They have to mill out a slot in the lower for this one. Here is the one that that my 522 came with. it has a screw that goes through from the other side and can be reversed for left handed. heavyduty 2/12/2011 5:51:04 PM Thanks, Chris – from the first small pic I thought it had the same arrangement as a 522. Bummer. I’m considering having a shop turn up a new loop end that would accommodate a HK hook. I figure that I could sell a few of them to make it economically feasible.Slings dont’ seem to get much attention. What’s a comfortable and balanced rifle sling for a 20″ varmint rig with high power scope

T Originally By Chrome308: Except for the turrets, it looks like a toss-up on paper. Hence my nod to the .mil issue piece. wildearp Get off my lawn! Platinum Contributor Team Jun 2003 USA AZ, USA Military 22303 : 0-0-0 : 6/16/2011 12:31:08 T I have three LRT M3s. Simple Solutions to Complex problems. SEMPER FI, DO OR DIE! NRA Life SASS Life chewbacca What is tinfoil today, is NEWS tomorrow. Bronze Contributor Team May 2004 USA AZ, USA 8808 : 0-0-0 : 6/16/2011 12:53:35 T I researched and looked at both for quite a while before I chose the SS. The HD series IS NOT the same as the old school SS scopes. I have top quality optics of all types, and the 10x42HD is a top quality scope, with excellent glass. “Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety.” -Ben Franklin KILLERB6 “The men with green eyes” Bronze Contributor Team Jan 2002 AFG AFG Military 7741 : 0-0-0 : 6/16/2011 1:02:37 T Originally By wildearp: I have three LRT M3s. Show off! I’m happy to have UNO. Scooter1942 Bronze Contributor Team Sep 2002 USA TX, USA 2150 : 0-0-0 : 6/20/2011 3:36:35 Well, I received the Leupold. Not in the best condition, a few scratches on the tube and the adjustment knobs are a little mushy. Called Leupold and they will replace the adjustments for free under warranty.

Eotech

Eotech

M14 Scope Mounts
Also I want to remind everyone that it is ok to love the M14 Scope Mounts‘s, just like we should love our Bow and arrows and slingshots too. Even obsolete weapons are still cool. wetidlerjr [Life Member] 8/10/2010 6:14:18 AM Originally Posted By GeorgeCostanza:… Also I want to remind everyone that it is ok to [...]

Also I want to remind everyone that it is ok to love the M14 Scope Mounts‘s, just like we should love our Bow and arrows and slingshots too. Even obsolete weapons are still cool.
wetidlerjr [Life Member]
8/10/2010 6:14:18 AM

Originally Posted By GeorgeCostanza:…

Also I want to remind everyone that it is ok to love the M14 Scope Mounts‘s, just like we should love our Bow and arrows and slingshots too. Even obsolete weapons are still cool.

Oh, gee, thanks !

–

How fat your wallet is and the quality
How fat your wallet is and the quality of accessories you are used to buying will be your guide. +1 Perfect answer Some personal observations 0.02 after having owned a Mesa Tactical setup on a 500… – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He [...]

How fat your wallet is and the quality of accessories you are used to buying will be your guide.

+1 Perfect answer

Some personal observations

0.02 after having owned a Mesa Tactical setup on a 500…

–
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about [...]

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –

Defense Review – BAE Systems ADAPTIV Hexagonal Pixelated Thermal …
BAE Systems ADAPTIV Hexagonal Pixelated Thermal/IR (Infared)/Multispectral Adaptive Camouflage/Invisibility Cloaking System/Vehicle Armor System for Infantry Ground …

aimpoint ml2 –

aimpoint ml2 –

There will never, repeat never, be M14 Scope Mounts‘s availible from CMP for civilian consumption. Never. Ever. Interceptor_Knight [Team Member] 5/12/2006 12:18:56 AM What happened to all of the rifles that “went back”? Valkyrie [Member] 5/12/2006 12:40:08 AM The base armory( a USN base) has several semi auto conversion, real deal, match M14 Scope Mounts‘s [...]

There will never, repeat never, be M14 Scope Mounts‘s availible from CMP for civilian consumption. Never. Ever.

Interceptor_Knight [Team Member]
5/12/2006 12:18:56 AM
What happened to all of the rifles that “went back”?
Valkyrie [Member]
5/12/2006 12:40:08 AM
The base armory( a USN base) has several semi auto conversion, real deal, match M14 Scope Mounts‘s that shooters(USN Members) can check out for matches.. I was tempted just to get to shoot one..

–

The lack of a chrome lined barrel on the SA guns is an added bonus too. MackUSMC [Member] 2/4/2009 10:00:10 PM Do it absolutley! it is a very fair trade. The poly may not have the finnish of the springfields but the parts on the rifle, such as the reciever, and op-rod are forged, not investment cast. the poly barrels are chrome lined and are equal in quality to GI M-14 Scope Mounts barrels. Parts for the M-14 Scope Mounts will interchange with the poly M-14 Scope Mountss with the exception of the gas cylinder lock. the first batch of poly/norinco M-14 Scope Mountss bolts were hit and miss on the case hardening, but you can get replacements or swap the poly bot for a GI. the only caveat about that is have it done properly and make sure the head space is acceptable. The rear sight truss, base and knobs were sometimes soft, and not as durable as the GI or springfield inc. parts.

Mesa Tactical
Mesa Tactical – Mesa Tactical

Mesa Tactical –
Mesa Tactical

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

The big thing with the VLTOR is a
The big thing with the VLTOR is a more conventional M14 Scope Mounts type stock mated to a collapsing buttstock with a seperate pistol grip. Kiznelly [Member] 9/9/2009 8:30:24 PM Originally Posted By Milo5: Troy, SAGE, And VLTOR, all offer a shortened length of pull through the use of collapsible stock assemblies. SAGE can also [...]

The big thing with the VLTOR is a more conventional M14 Scope Mounts type stock mated to a collapsing buttstock with a seperate pistol grip.
Kiznelly [Member]
9/9/2009 8:30:24 PM
Originally Posted By Milo5:
Troy, SAGE, And VLTOR, all offer a shortened length of pull through the use of collapsible stock assemblies.
SAGE can also offer side folding capability, the SAGE rear block can be replaced with a side folding block for even more compact storage.

–

Good luck with yours. acidman 9/29/2010 9:59:04 PM Originally Posted By rlmxracer: I just ran another 75 shells though it today with no problem. I even shot some Winchester xtra-lite 7.5 bird shot 1oz shot@ 1180fps. Good luck with yours. I sure hope the updated fasteners solve my issues. If so, then a big thumbs up to Mesa Tactical. We will see. It’s good to hear that your works as advertised. acidman 10/5/2010 9:08:44 AM Just a final update concerning my Mesa Tactical 930spx side saddle.

So will the Mesa Tactical be too large
So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175? So plate carriers cont work as well if plates are not in… Glad to know that now. Just out of curiosity; what is the price range for a good set of plates? ARCANGEL 5/29/2009 8:50:57 AM Check THIS [...]

So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175?

So plate carriers cont work as well if plates are not in… Glad to know that now. Just out of curiosity; what is the price range for a good set of plates?
ARCANGEL
5/29/2009 8:50:57 AM
Check THIS for an idea on plates pricing.

and HERE too.
TimW
5/29/2009 3:01:25 PM
Originally Posted By LRB_M1A:
So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175?

Probably be too big…I have a friend who is roughly that size. Height-wise, it was fine. But it wouldn’t cinch down tight enough. Here’s what he wrote when I asked his size:

I am 6-3 and 180 lbs. As for chest size…..not sure but I’m pretty thin there too. My waist is 34 or 36 and my chest is close to that.

If I had soft armor on I could have fit the vest.

So there you have it.

LRB_M1A
5/30/2009 12:10:14 AM
Well thank you TimW for the honest reply.

I am playing around with the idea of buying a plate carrier now that I know plates are not toooo expensive. I was under the assumption that plates alone were in the $1000 range.

Currently for my gear set up I have x2 TT 5.56 Triple Mag Panel, x2 5.56/.223 Single Mag Pouch, HSGI Blowout Pouch, and a HSGI Mini Modular Radio pouch. Am I going to run into problems fitting all of that onto a plate carrier?

vedubin01
5/30/2009 12:46:54 AM
TimW
5/30/2009 2:04:16 AM
Originally Posted By LRB_M1A:
Currently for my gear set up I have x2 TT 5.56

–
Mesa Tactical

Men’s Lined Jeans, Men’s Jeans, Men’s Casual Clothing, Clothing …
Cabela’s E-Mail Sign-Up. Our e-mail is filled with deals, news, sneak previews, top-rated products, e-mail only specials and more.

eotech magnifier –

eotech magnifier –

Larue Tactical
[YOUTUBE] http://www.youtube.com/watch?v=uMine84RTEQ&feature=channel_video_title StrangerDanger [Member] 9/9/2011 5:24:07 PM EDT BAD ASS is an easy choice when selecting the best. Particularly in the 45 degree variant. StrangerDanger [Member] 9/9/2011 5:24:47 PM EDT Double Tap Duffy [Dealer] 9/9/2011 5:51:55 PM EDT Now if only we can convince Larue Tactical to make some 45/90 receivers…it’d be easy, two out [...]

[YOUTUBE] http://www.youtube.com/watch?v=uMine84RTEQ&feature=channel_video_title StrangerDanger [Member] 9/9/2011 5:24:07 PM EDT BAD ASS is an easy choice when selecting the best. Particularly in the 45 degree variant. StrangerDanger [Member] 9/9/2011 5:24:47 PM EDT Double Tap Duffy [Dealer] 9/9/2011 5:51:55 PM EDT Now if only we can convince Larue Tactical to make some 45/90 receivers…it’d be easy, two out of three requirements are already met: 1. Mill off the selector stops, LT receivers don’t have any 2. 68 degree Fire engraving, LT receivers have a radiused FIRE engraving that’s already usable 3.

M14 Scope Mounts
M14 Scope Mounts M14 Scope Mounts – Mesa Tactical I’ve seen it done with adjustable flashlights, and thought doing it with something like an EOTech would be kick-butt As far as the riser, I like the iron to be in my lower 1/3 optic window, but some like a true co-witness which is what the [...]

M14 Scope Mounts
M14 Scope Mounts – Mesa Tactical

I’ve seen it done with adjustable flashlights, and thought doing it with something like an EOTech would be kick-butt As far as the riser, I like the iron to be in my lower 1/3 optic window, but some like a true co-witness which is what the EOTech with the factory mount will give you.

I’ve seen it done with adjustable flashlights, and thought doing it with something like an EOTech would be kick-butt
As far as the riser, I like the iron to be in my lower 1/3 optic window, but some like a true co-witness which is what the EOTech with the factory mount will give you.

So will the Mesa Tactical be too large
So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175? So plate carriers cont work as well if plates are not in… Glad to know that now. Just out of curiosity; what is the price range for a good set of plates? ARCANGEL 5/29/2009 8:50:57 AM Check THIS [...]

Chinese receiver and several Springfield Armory, Inc. receivers.
Chinese receiver and several Springfield Armory, Inc. receivers. It would not insert into the operating rod channel. The operating rod looks very good but I recommend having a M14 Scope Mounts gunsmith fit a TMI operating rod to your receiver. … Continue reading →

Larue Tactical
Larue Tactical AM EDT Found this in the KAC forum. What’s the story on this mount, never seen it before? How can I get one? Overton-AR 3/8/2011 10:06:17 AM EDT 5 – Larue Tactical rails (1 of the 9″, 3 of the … Continue reading → CMC Government Supply Adds DALLAS, TX April 24, 2012 [...]

Larue Tactical
AM EDT Found this in the KAC forum. What’s the story on this mount, never seen it before? How can I get one? Overton-AR 3/8/2011 10:06:17 AM EDT 5 – Larue Tactical rails (1 of the 9″, 3 of the … Continue reading →

CMC Government Supply Adds
DALLAS, TX April 24, 2012 – CMC Government Supply is pleased to be offering

Gun Accessories
9/15/2011 12:25:38 PM Originally Posted By LuckyDucky: You can make this crap in China for cheap. So, buy Chinese. Problem solved. How many companies do you run? Just trying to get a feel for things. LuckyDucky

M14 Scope Mounts
M14 Scope Mounts

Gun Accessories
1/19/2010 7:00:27 PM 44mag Top Gun Supply Whamo [Member] 1/19/2010 10:16:08 PM Natchez Shooters Supplies Midway edit – Great service from both. They both have printed catalogs – Midway’s catalog is just plain awesome, Natchez’ is small but nice. Kodiak-AK

Mesa Tactical
The Friday before Mother’s Day each year is known as Mesa Tactical Mesa Tactical – Wobblin-Goblin [Team Member] 5/13/2006 12:49:39 AM Originally Posted By Different: The Connecticut State Rifle and Pistol Assocation has at least one M14 Scope Mounts NM … Continue reading →

Aimpoint Comp M4
Aimpoint Comp M4 I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 [...]

Aimpoint Comp M4
I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 in the QRP [...]

I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 in the QRP mount. Any suggestions to get them to line up other than buying the LaRue LT659 mount for the M4? I’d have just left it alone and stuck with the twist mount rather than having to buy 2 mounts. opticsplanet [Industry Partner] 2/7/2012 4:35:56 PM Do you have this spacer installed on your CompM4? http://www.opticsplanet.net/aimpoint-standard-ar15-spacer-for-qrp2-qrw2.html Chase B. Freaky

Rifle Slings
5/3/2012 10:30:28 AM have a model number for these? I may be interested in 2-4 of these depending on the model. docslester

May 17th, 2012 by admin
Posted in Uncategorized |
No Comments »